Ask a Question
Rental/General Inquiry | Technical Info

Anton Bauer Ultralight-2

The UL2-20 Ultralight-2 is an inexpensive, compact camera mounted light. Currently, one of the most widely used lights for ENG (Electronic News Gathering) applications, the UL2-20 easily mounts to all professional cameras.

The Ultralight-2 employs a patented universal mounting system. Options for either a 1/4-20 threaded mount, or shoe mount are built-in to allow the light to mount to any professional camera. No special mounting studs or hardware options are required to mount the light to any camera. With the head module removed, the Ultralight-2 folds like a pocketknife allowing it to stay mounted on the camera, even when the camera is transported in a case.

A 20" cable is hard-wired from the unit to a two-pin PowerTap connector. PowerTap receptacles can be found on all Anton Bauer Gold Mount quick-change battery mounts. Most digital (DVCAM, DVCPRO, D-9, Digital Betacam, Betacam SX, etc) camcorders conveniently incorporate a PowerTap connector near the viewfinder to allow for an easy connection to the Ultralight-2. This exclusive Anton Bauer feature allows a camera mounted light, wireless microphone, or other DC powered accessory to operate via the camera battery. The PowerTap is rated at 10 amps and is internally fused for safety.

A special power circuit in the PowerTap mates with the VTR roll signal in the camera/camcorder allowing an Ultralight-2 to turn On/Off automatically with the VTR. The Ultralight-2 will turn on before tape is at full 'speed' and off after the tape stops rolling. This assures that every shot is free from the objectionable shadows caused by overhead lights, yet battery drain is kept to a minimum. A 25W, BAB (GU5.3 Base) lamp provides pleasing light for most indoor interviews in the 3 to 6 foot range.